2022 Fendt 1000 Vario 1050
Because success requires both brain and brawn.Tractive power combined with intelligence - with up to 517 hp, the Fendt 1000 Vario is a true powerhouse. Thanks to the uniform FendtONE operating system, handling on the Fendt 1000 Vario is intuitive and management from the office has never been easier. This saves time, money and nerves.
Experience the Fendt 1000 Vario seriesFendt Spotlights are unique innovations that make your work more productive, profitable, and easier.
Fendt iD low-speed concept- Perfect combination of all vehicle components such as engine, transmission, fan and hydraulics and all auxiliary consumers to ideal engine speeds
- Reach the highest torque even at low engine speeds
- Smooth, quiet operation
- Exceptionally low fuel consumption
- Extended service life
- Ultimate speed control from 65 ft./h to 33 mph
- Independent drive of front and rear axle
- No manual all-wheel drive necessary
- Optimum engine/transmission matching in conjunction with Fendt iD low-speed concept
- Smallest possible turning circle due to pull-in turn effect
- No need to change driving ranges
- Air filter is blown out during work by means of short air blasts
- Reduced maintenance and increased reliability
- Automatically reduces side lean at driving speeds above 12 mph and actively suppresses roll when cornering
- Increased control and improved driving comfort
- Direct view of the front linkage
- Easier attachment and removal of front weights
- Fully integrated tire pressure control system with on-board valve and air guide technology
- Reduces compaction, improves ride quality, and reduces tire wear
- Simple operation via the terminal
- Four modules from which to choose as required
- Each module consists of a basic package with all necessary start-up applications
- Can be extended as required with options: Fendt Contour Assistant, Fendt TI Headland, Fendt Section Control, Fendt Variable Rate Control and many more
- Regular software updates to keep you up to date with the latest technology
- Automatic section control for up to five implements or application units simultaneously, support for up to 144 sections at a time
- Variable control of the application rate per part-width section (zone) when the implement is suitably equipped, support for up to 144 zones
- 2022
- Fendt
- 1000 Vario
- 1050
- 4WD
- Cylinder: 126 mm
- Water
- 6
- 12.4 L
- Constant power ECE R24: 380 kW /517 hp
- 1,450 RPM: 1,770 / 2,400 Nm
- 1700 rpm | Constant power range: 1500 - 1700 rpm
- Rise: 17.0%
- Cylinder: 166 mm
- 1000 / 1000E
- Type: Stepless VarioDrive / Model: TA 400
- Four-wheel: Dual-circuit four-wheel braking system with 4WD, with / without steering brake
- Oil change interval Operating hours: 500
- Range forward: 65 ft. / hr. to 33 MPH / (20 m/h to 50 km/h) / reverse: 0.01 to 21 MPH / (0.02 to 33 km/h)
- Electrohydraulic power lift conrol (EPC) with shock load stabilizing and standard load compensation | Aux. control valves, max. rear / front: 6 / 1
- 1 pump: 43.6 GPM / 165, 58 L / 220 min | 2 pumps: 113.5 GPM / 430 L (55.5 / 210 + 58 / 220) min
- volume control valves: High flow volume of 36.9 L / 140 min
- Comfort cab w/o VarioGuide: 140.5 in / 3,570 mm
- with standard tires with comfort ballast pick-up and rear linkage horizontal: 242 in / 6,157 mm
- 130 in / 3,300 mm
- rear linkage thru full lift range 24 in. behind hitch point: 16,890 lbs. / 7,661 kg. | Max. front linkage: 12,553 lbs. / 5,693 kg.
- Diesel: 211 Gal (800 L) | DEF: 22 Gal / 58 L
- Unladen (basic tractor—tanks full, without driver): 30,666 lbs. (13,910 kg.) | Max. perm. overall: 50,706 lbs. (23,000 kg.)
- WAM54724T00F01564
- $799,000.00
- Trochu, Alberta
- Pre-Owned
- 2022
- Fendt
- 1000 Vario 1050
- WAM54724T00F01564
- 626
- Type: Stepless VarioDrive / Model: TA 400
- Available
- WAM54724T00F01564